Norpole EWCIM65S Use and Care Manual download pdf (Page 26)

3. Yellow LED: Ice Harvest indicator light.

When this LED is lit, the unit is working in the ice harvest mode controlled by a temperature

probe on the evaporator. When the yellow LED is flashing, the unit is working in the ice

Harvest mode controlled by a fixed timer.

4. Clean button: When this button is pressed, the unit enters the Cleaning mode. The green and

yellow LEDs flash together. To stop the Cleaning mode, just press the button again.

5. Mode button: Mainly for service. When this button is pressed, it can change from Ice

Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can

judge the mode from the status of the green and yellow LEDs.

6. Ice size adjust: Press and hold the “Clean” button and the “Mode” button together for at

least 3 seconds. The unit will enter the Ice Size Adjustment mode indicated by the blinking

green LED light.

Smaller ice setting:

Press the “Clean” button to decrease the size of the ice cubes. The red LED will flash as you

decrease the size. Once the smallest ice cube size is reached, the red LED will continuously

blink.

Larger ice setting:

Press the “Mode” button to increase the size of the ice cubes. The yellow LED will flash as

you increase the size. Once the largest ice cube size is reached, the yellow LED will

continuously blink.

After 10 seconds without any operation, the unit will automatically memorize the current ice

setting and return to the previous mode.

NOTE: During the Ice Size Adjustment mode, if the red, green and yellow LEDs blink

together, the unit has entered the default factory setting of the ice size adjustment.

It is not recommended to adjust the ice size after installation.

7. If the red, green and yellow LEDs are flashing together, the machine is not working. The

major fuse of the control box has failed. Call for service.

NOTE: Avoid letting water contact the control box.

MAJOR FUNCTIONS

1. Completely automatic operating procedure.

2. When the ice storage bin is full of ice cubes, the machine stops working automatically and

starts again after the cubes are removed.

3. The different colors of the LED display indicate various work modes.

4. Indication of failure of major control box fuse.

5. The fan motor responds to the ambient temperature. If it is cold, the motor will stop working

to keep the cooling system in good working condition.

6. Ice cube size is adjustable.

7. A sensitive probe and accurate timer enhance the performance of the ice maker.

8. Manual Clean mode to start or stop the ice making system cleaning.

9. Built-in compressor protection system.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 58 59

No comments

Norpole EWCIM65S Use and Care Manual Page 26